SPECIFICATION
Model | 26L1 |
Power | 400W |
Cavitation frequency | 40Khz |
Cavitation modes | 4 types of pulse |
Radio Frequency | 5Mhz high frequency |
Radio Frequency modes | AUTO,M1,M2,M3 |
Vacuum | 650 mmHg |
BIO mode | M1,M2,M3,M4 |
Machine Display | 7 inch touch screen |
Input voltage | 220~240V/100-120V, 60Hz/50Hz |
Applicator Description
1.cavitation Hand piece:
Take the cavitation hand piece on the relevant holder,then insert it into the cavitation 4 pins socket
2. Vacuum RF PDT Handle
PieceTake the Vacuum RF PDT hand piece on the relevant holder,then insert it into the socket.
Vacuum RF PDT socket.
3.Radio Frequency Handle piece for Body :
Take the RF-body hand piece on the relevant holder,then insert it into the RF-body 6 pins socket.
4.Radio Frequency Handle piece for Face :
Take the RF-body hand piece on the relevant holder,then insert it into the RF-body 5 pins socket.
5. BIO/EMS Handle Piece for Face :
Take the BIO/EMS hand piece on the relevant holder,then insert it into the BIO/EMS Handle socket.
6. Big laser pads:6 pieces:
Take the big lipo laser hand piece on the relevant holder,then insert it into the 2 pins socket.
7.small laser pads:2 pieces:
Take the small lipo laser hand piece on the relevant holder,then insert it into the 2 pins socket.
RF Vacuum Suction:
The suction effect occurs due to a reduced atmospheric pressure inside the applicator hole. As the air is sucked out, the skin and subcutaneous tissue
is lifted upwards, folds then compresses.
– Increased local blood circulation & stimulates lymphatic drainage.
– Facilitates fibroblast activity & promotes vasodilation and diffuses oxygen.
– Enables precise & more up-close delivery of energy.
Multipolar RF is one of the latest technological breakthrough in the fields of radiofrequency. Innovative technology harnesses the inherent benefits of RF yet overcomes the limitations of previous mono & bi-polar technologies.
Electroporation:
Electrical pulses create a temporary hole in the surface of the skin and a valid ampoules penetrate deep into the skin through this hole.
Without damage to the cellular skin structure, micro-current creates a temporary.
Opening on the skin for penetration of nourishing ampoules into deep layers of the skin.
Double Lifting:
Cross-crossing micro current stimulates cellular structure of the skin, thereby resulting in firmer, smoother skin. Facial muscle massage effect by
electrical pulses.
By supplying micro-current to flow through superficial layer of epidermis, lifting effect from stimulated facial muscle is achieved.
Effective in Facial Lifting & Tightening and Micro-circulates the treated area.
Cavitation Function
l Apply Sufficient Amount of gel
l Keep the applicator in full contact with treatment area
l Do not keep the applicator at the same place
l Move the applicator slowly, But constantly
l Avoid the treatment over bone and do not aim directly to the joint
l Always make a skin fold in order to get better access to the fat tissue
l In case of resting during treatment, please “PAUSE” and then “STOP” to avoid over-output of the machine
Vacuum RF PDT Function
l Apply sufficient amount of Oil
l Keep the applicator in full contact with treatment area,
l Do not keep the applicator at the same place
l Move the applicator slowly, but constantly.
l Avoid the treatment over bone and do not aim directly to the joint
l Always make a skin fold in order to get better access to the fat tissue
l In case of resting during treatment, please “PAUSE” and then “STOP” to avoid over-output of the machine
Radio Frequency Function
l Apply sufficient amount of gel
l Keep the applicator in full contact with treatment area
l Do not keep the applicator at the same place
l Move the applicator slowly, but constantly.
l Avoid the treatment over bone and do not aim directly to the joint
l Always make a skin fold in order to get better access to the fat tissue
l In case of resting during treatment, please “PAUSE” and then “STOP” to avoid over-output of the machine
BIO/EMS Function
l Apply sufficient amount of gel or Oil
l Keep the applicator in full contact with treatment area
l Do not keep the applicator at the same place
l Avoid the treatment over bone and do not aim directly to the joint
l Always make a skin fold in order to get better access to the fat tissue
l In case of resting during treatment, please “PAUSE” and then “STOP” to avoid over-output of the machine
